Commercial Steamer Troubleshooting Guide
- 223 Views
- March 10, 2022
- Business & Finance
Commercial steamers are becoming increasingly popular due to their extensive usage in the restaurant industry. Just like the other commercial kitchen appliances that can develop issues, a restaurant steamer is not an exception. Therefore, we are going to take a look at some of its problems and how to perform commercial steamer repair.
No Steam From Steamer
It is quite often that you observe no steam as you turn on your commercial steamer. According to the experts, this is one of the most common problems related to commercial steamers. There could be several reasons contributing to this issue. Surprisingly, the most common happens to be that the steamer runs out of water.
Yes, you may already know, commercial steamers make use of water to produce steam. Therefore, if there is not a sufficient amount available, the steamer will simply not function. Furthermore, the unit will also fail to produce any steam if there is a clog in the system.
However, in this case, you will need to access the unit’s inside. This is something that the experts do not suggest doing on your own as you can risk injuring yourself and damaging important components along the way. With that said, it is important that the task be handed over to a professional who knows how to get the unit running without any complications.
Steam Not Turning On
While some steamers will hardly produce any steam when they are turned on, others will simply fail to turn on in the first place. If you are experiencing this, the first thing you should do is look at the operational light. If it isn’t lit, it means that the unit is not receiving power.
Check the plug socket to ensure if anything isn’t loose and if possible, inspect the fuse in the steamer’s plug as well. If the plug comes out to be the culprit, you will need to replace the fuse and test it in another power socket.
Upon doing so, if the steamer still does not turn on, it means that the unit is clogged with limescale and sediment. Then again, you will need to disassemble the steamer to fix the issue. Therefore, unless you have the necessary skills, we suggest hiring a professional to fix the problem.
Failure Of The Steamer To Steam
Commercial steamers are designed to produce steam. If you observe that it is not producing steam, it means that you should shut down the unit and inspect it for any potential problems. Sometimes, you might come across distilled water in the cup but the machine does not produce any steam.
In this case, the steamer unit inside the machine might be experiencing a problem. Unfortunately, the unit is expensive to replace and we suggest hiring a professional to help you inspect and fix the problem. Otherwise, you can easily end up wasting your time and money.
Steamer Not Working After The Use Of Tap Water
If you have filled the steamer with tap water and it fails to run, the problem may be with the tap water. The reason is that the nozzles get blocked due to deposits with time. One of the ways to solve the problem is by running calcium, lime, and rust through the nozzles to unblock them.
The good news is that the CLR solution is easily available to local departmental stores. Depending on the blockage, you might have to use different solutions as well, such as vinegar and water. If even that does not work out, it means that the blockage is severe and will require opening up the machine.
However, that is not going to be an easy job. You should consult a professional who can safely access the nozzles and remove the blockage.
Steamer Stops Abruptly
In some cases, the steamer might stop abruptly. This probably means that there is a power problem. With that said, you should first try resetting the breakers. If that does not solve the problem, you will have to inspect the appliance for rust and corrosion.
Commercial steamer problems are sometimes both easy and difficult to fix. Regardless, it is important that you keep up with regular maintenance and hire a commercial appliances repair Fairfax service if the problem at hand seems to be too complicated.