How To Maintain Sewer Line Pipes
Sewer overflow is always an ugly situation. You can avoid rushing to sewer cleaning companies if you clean and maintain the sewer lines regularly. These tips will save you the trouble:
Check Your Sewer Lines
Every homeowner must know how the sewer lines run. When you have knowledge of the drainage system, it will help you detect anything that seems off. Once you are aware of the sewer line system, inspect the lines regularly to look for trouble.
Pay Attention to What You Flush
This should go without saying but unfortunately, we are not that careful about what we throw in the flush. If you want to ensure your pipes keep running, don’t throw just about anything in the bathroom. You will be surprised to know that plumbers don’t even recommend throwing flushable wipes down the drain. They don’t just damage the drainage system but clog the entire public sewer system.
Watch Out For Slow Drain
Don’t let the drains get clogged. A common sign of clog is slow drains. A quick fix for that would be pouring a mix of hot water and vinegar down the drain. This should unclog whatever has blocked the drain. You can also use drain cleaners.
It’s recommended that you use this remedy every couple of months. This will help keep your drains working in an optimal condition. If the drain clog continues to occur, then it’s a sign that you must call a local plumber and have the drain cleaned.
Look For Water Leaks
Investigate the pipes to look for leaks. Often, the leaks are traced back to garbage disposal, water heater and refrigerator. Apart from inspecting the pipes, you can also look for other signs of water leakage like staining on the ceilings, walls or a pool of water around the floor. Mildew is also a sign of a water leak. If you are unable to track the leak, again, call a professional to inspect the issue and fix the problem before it turns into major water damage.
Test the Water Pressure
Check the water pressure regularly. You can use a gauge for this purpose. A pressure regulator can be used for keeping the water pressure at a level you like.
Be Careful With Grease
Never pour cooking oil or grease down the drain directly. This is one of the foremost reasons why drains get clogged.
There are some people who think if they pour grease and then throw hot water immediately, this would not result in any clog. This is no remedy. Water will cool down and the grease will become hard eventually. If you continue to do this, your drain will clog very soon. Then, pouring down chemicals to fix the problem won’t even work. You will have to call professional help.
Get the Old Lines Replaced
If your sewer lines are old, this makes them the most susceptible to plant roots. It is recommended to replace the sewer lines that are more than 30 years old. To save the cost, you can get them replaced with plastic pipes. They are not just economical but they are much less vulnerable to a tree or brush intrusion.
Call a Professional Rooter Service
No matter how good care you take of your drainage and sewer lines, it’s mandatory to have rooter service performed each year. This will keep your sewer lines clean. Even if there are no trees or bushes in the pipes, there must be dirt, debris, hair and other junk. Once all this is removed from the pipes, the system will keep running throughout the year. You won’t experience unexpected clogs or damage.
Keep Plants and Bushes Away From the Sewer Lines
This happens most of the time – roots of trees, plants, and brushes fall into the drain and clog the sewers. This is not the only problem. When roots fall into the sewer, they start growing and cause a major clog. They can even destroy the pipes if not removed. Make sure the plants and trees are away from the sewer lines to prevent this from happening.
With these tips, you will be able to maintain the sewer lines for months. However, don’t forget to call drain contractors Manhattan for annual cleaning and regular checkup. This will keep all sewerage and drain troubles at bay.