Commercial refrigerators repairs professionals report that most of the refrigerator problems can be prevented thus avoiding having to undertake frequent refrigerator repairs. To help you out, here are some of the ways in which you can avoid having to repair your fridge:
Clean the condenser coils
Refrigerator coils, usually located under the fridge collect dust, pet hair, and debris. The coils are critical to the refrigeration process. When they are dirty, the refrigerator works too hard than it should thus it ends up consuming a lot of power.
Refrigerator experts also report that the dirty condenser coils make it extremely difficult for the refrigerator to transfer heat from the inside to the outside environment thus the unit runs longer than usual. The compressor also tends to run hotter than normal.
This not only results to the fridge consuming a lot of power, it can also lead to the damage of the compressor and associated parts.
For you to ensure that your refrigerator is in top working condition and you don’t spend a lot of energy cooling your food, you should keep the condenser coils clean all the time.
All you need to do is to access the coils by removing the grill or kick plate located at the bottom of the fridge. Depending on the model of your fridge, you will find the plate at the back or front of the unit.
Carefully clean the coils taking care that you don’t bend or cut them. In some cases, you may find that the coils are damaged or worn out. In such a case, you have to way out other than to replace them. The cool thing is that there are plenty of replacement coils in your local hardware stores. You can also purchase them online.
When making the purchase, ensure that you buy pieces that are of the right model of your fridge.
Keep refrigerator doors closed
Did you know that leaving the refrigerator door open makes the refrigerator compressor run hotter and takes longer to cool the food? The refrigerator has also been shown to consume more electricity when you leave the door open.
Refrigerator repair experts observe that when you leave the door open for a long time, you lead to the overheating of the compressor. Due to overheating, the compressor shuts off until it cools off. In some cases, if the heat is excessive, it results to complete damage of the compressor.
For you to prevent cold air from escaping the fridge, you should keep the refrigerator door closed all the time—of course, unless you are getting something out of the fridge. While you are at it, keep the door seals or gaskets clean. This is to ensure that they are making full contact with the fridge when you close the door.
Allow adequate air flow around the fridge
Another thing you should do to prevent having to repair the unit regularly is to ensure that there is adequate air flow around the fridge. If you visit most places of work, you will find the refrigerators constructed into tight-fitting cabinets without ventilation. This is wrong.
Remember, when you do this you leave little ventilation which reduces the lifespan of the refrigerator. The unventilated unit also tends to develop problems every now and then. The main issue being a constant failure of the compressor.
The fridge also doesn’t cool the food as well as its supposed to. You should note that poor airflow means that the fridge can’t remove heat thus it doesn’t cool food.
Do you want your unit to function optimally? Ensure that there is adequate air flow around it. The best way of going about it is allowing a few inches of space on top and sides of the fridge.
Don’t overload the fridge
Although, refrigerators are sturdy and can take a lot of food, you shouldn’t overload them. This calls for you to avoid putting in more food than the unit can handle. In addition to doing so weakening the doors, shelves, and bins, it also tends to speed up the wearing out of the unit thus you have to buy a new one after just a short while.
Do you want to keep the food cool and ensure that the fridge lasts for a long time? Commercial appliances repair Fairfax professionals recommend that you never put more food in the fridge that the unit can handle.