Furnace Service: Tips On How To Keep House Heating Costs Low

People want a warm house, but they don’t want to spend a lot of money on it, and you don’t have to. This is because there are plenty of tricks you can use to lower your heating bills. Here are some of these tricks as given by furnace service professionals:

Seal it up

It’s common for warm air to escape from the home’s windows and doors. As you might have guessed, this makes the furnace work for long and harder to keep the house warm. The leaks, cracks, and gaps around the outer walls, doors and windows allow the air to escape. For you to save on your heating you should seal the windows with materials that are specifically designed for the work.

You also should consider re-caulking the outside window frames. All you need to do is to remove the old caulk, clean the surface, and replace the new polyurethane caulking. For ideal results, you should do the re-caulking when the temperatures are warmer.

Do you live in extremely cold areas? Consider heating up the surface with a blow dryer or any similar product for you to achieve ideal results.

If your home has weather stripping and it’s old, the warm air might be escaping through it. Heating experts report that when you replace the weather stripping you save your heating bill by up to 30%.

You need to inspect the weather stripping and if it’s damaged or leaking, go ahead and remove it and install a new one. As rule of thumb, ensure that the new stripping is installed by a professional.

Install a programmable thermostat

A programmable thermostat allows you to easily control your heating appliance. Heating professionals report that when you properly make use of the thermostat, you can save up to 15% of your heating costs.

Using a programmable thermostat, you easily bring down the temperature when your house is hot enough. When you are out of the house, you can even control the temperature virtually. When leaving the office, you can switch the furnace on and set your desired temperature so that you can find a hothouse by the time you are getting home.

Add insulation to your house

Studies show that most old homes, especially those constructed before the 1980s lack proper insulation—especially in the attic.

Have you noticed that your heating bills are increasing by the day? You should ask a contractor to inspect the insulation in your house and if there is none, install it. A properly insulated house has been shown to save up to 50% of the home heating bill.

Most of the homes miss the insulation in the attic, but this shouldn’t be the only place you should insulate—also consider insulating the water heater and any other areas where heat can be lost. Again, ensure that the insulation is done by an expert.

Let the sun in

The sun is a natural source of warmth and it not only saves you money on your home heating, it also comes in handy when it comes to your family’s emotional health. During the sunny days, you should open the blinds to let the sun in.

When the sun goes down later in the day, remember to close the drapes so that you can keep the heat in. When you do this, you don’t use the furnace much hence you end up saving a lot of money in the long run.

Make use of the ceiling

Many people have the impression that the ceiling fans are only important when you are cooling the house, but this is not the case—you can also use them to heat up the house. During winter, run the fans clockwise to draw the room’s air up and force the warm air down.

Tune up the heating appliance

The final thing you need to do is to tune up your appliance. At the end of the year, hire a furnace repair service Long Island professional or any other expert to inspect your unit and fix any issues it might be having. As rule of thumb, ensure that the contractor you hire is certified and experienced enough.

Kitchen Decluttering Tips

Okay, so a few months back you had your kitchen renovated and had awesome marble countertops installed in your kitchen area and island. You are totally amazed by the results and you have been enjoying it ever since. You’ve been so inspired in cooking and creating dishes like a true Chef, until one day, you just find yourself searching for an item into a pile of stuff on your kitchen island and realized that clutter was never there when the kitchen was new. It’s definitely a sign that you need a serious decluttering moment with your kitchen.

DECLUTTERING 101: THE KITCHEN

Remember this, any flat and empty surfaces are like an open invitation to place something down and leave it for – God knows when you can remember. A single item and ultimately evolve into a clutter over time. Since the kitchen area is where your entire hood spends much of your time daily, the counter spaces seem to be an open parking lot of items of any sort. If you get to find your razor in the kitchen, by all means, dedicate and focus your attention in bringing back what your kitchen looks like.

THE TYPES OF KITCHEN COUNTER CLUTTER

There are actually three classifications of kitchen clutter and it’s best that you attend to them one class at a time.

TYPE 1:

Stuff That Doesn’t Belong In Your Kitchen

  • These are the items that are not for kitchen use like school books, hammer, nails, hair spray, and a lot more. Now, these items are a lot easier to work with since you can easily classify that do not belong to the kitchen area, but for some “you don’t remember” episodes, it’s just there. All have to do is to simply sort them all and place them back where they belong, respectively.

TYPE 2:

Paper Clutter

  • Paper is one of the items you will always see in any cluttered areas in the house or office. If you happen to have a lot of paper clutter and you wanted to sort them while clearing kitchen counters, better yet collect them all from the kitchen place them in a small box or folders then set them aside. You can deal with them right after you’re done with the kitchen pile. If you are ready to sort out your papers, carefully go through each of them and segregate which one should stay on file and which one goes straight into the shredding machine.

TYPE 3:

Stuff That Belongs In The Kitchen, But Maybe Not On Your Counters

  • This third type is the kind of clutter that is also the hardest to sort out. These are the things that belong to the kitchen, but should never be placed on the counter and rather should be kept in a cabinet or drawer.  Or sometimes is really a clutter that should be completely disposed.
  • One example that is part of this clutter classification are some appliances that you use, but for a few times only. Now, ask yourself again: How often do you use it? Where can you keep it after use? Will you be able to easily get it in case you will be needing it again?
  • There are some people who are so sentimental when it comes to the home items that they refused to dispose of them even when they are no longer needed. While some find old appliance or some kitchen decorative as an element that will make the kitchen space look warm and homey.
  • Some individuals prefer the minimalist concept where kitchen counters should be cleared and only a few items are placed on the counters and island.
  • Make it a habit to clear your kitchen counters until you are satisfied with the outcome. The need to go back and forth is part of the decluttering process because of the various items that had been overstaying in your kitchen for quite a while now. You can move them to a drawer or cabinet just see to it that you will be checking back on those items again to see if there’s any that shouldn’t be there. Also, remind the rest of the family to help in keeping the kitchen clear of any clutter so they should be responsible for their own stuff and never leave anything on the counter.

Kitchen decluttering should be a daily habit if you wanted to keep an organized and clean kitchen area. The granite countertop installers Reston wouldn’t be pleased to see the counter they have installed cluttered with all sorts of stuff from all over the house. Imagine how relaxing it would be to see your kitchen space immaculately clear with just the appropriate minimal décors. It’s a breeze to start preparing food again.

Furnace Service: Common Furnace Myths

Just like any other heating appliance, the furnace is surrounded by plenty of myths that can derail you, especially if you are a new homeowner. Here are some of the most common myths as given by furnace service professionals:

It’s a matter of brand

When the furnace stops working, some people have the notion that you only need to replace them with the same brand, but this isn’t the case. You should note that there are plenty of factors you need to pay attention to when you are buying a new appliance.

One of the core factors is the energy rating. This determines the efficiency of the furnace. The higher the rating, the more efficient the unit is, thus the more energy it will save you over the long run. Units with high energy ratings also tend to last for a long time.

You also need to consider the size of the unit. The larger the house, the larger the furnace you should buy, and vice versa.

If this is the first time you are buying a furnace, you should ask a reputable professional to guide you through. The last thing you want is to spend a lot of money on a unit only to find it defective.

Cold spots are normal

It’s common to find some of the rooms colder than others. While this is common, it’s not normal. Cold spots indicate inconsistent heating due to a faulty heating system. There are plenty of things that can bring about this issue. One of the most common ones is dirty or damaged air filters.

You should open up your appliance and check the condition of the filters. If they are dirty you should clean them. In some cases, you might find them too dirty or damaged for cleaning. In such a case you should replace them.

If you find that the filters are in good condition, but you are still having the cold spots, you should hire a professional who will undertake furnace inspection and fix the problems that might be present.

You will save money by undertaking regular repairs

You will find some homeowners repairing their heating systems over and over when they stop working. While there is nothing wrong with this, fixing the unit too many times is absurd.

For example, if you have to hire a furnace repair professional every week, your unit might be costing you a lot of money to fix which doesn’t make sense.

If you find that you are repairing the unit too often, you should find out the age of the appliance. Is it more than 10 years? It’s time that you think about getting a new, modern, and efficient unit.

As mentioned above, you should pay close attention to the energy rating of the new appliance. Also, put great consideration to the size of your house.

You are better off with a large heating system

When you are buying a new furnace, you might have heard people saying that you are better off buying a large unit, but this isn’t the case. Many people have the notion that when they buy a large appliance, it will heat the house faster thus keep the house more comfortable.

While the unit will heat the house fast, it will most likely end up consuming a lot of energy, which translates to a large energy bill at the end of the month.

If you have to replace your furnace, you should take the right measurements of your house and ensure that the new appliance you are buying is the one recommended by experts.

The furnace is a matter of installing and forgetting it

You only need to buy a furnace, install it, and forget it, right? Wrong. After you have bought the right appliance for your home, you need to maintain it properly for it run efficiently and last for a long time.

At least once a month, you should inspect the air filters and if dirty, clean them. If too dirty or damaged, you have to replace them. you also need to hire a furnace repair service Long Island professional at least once a year to inspect the unit and fix any issues it might be having.

Guide To Working With Arborist Services Providers

When you want any services on your trees you should hire an arborist. There are plenty of arborist services that you can get from the service providers. Some of these services include:

Pruning: The professional will help you in determining whether your tree is ripe for pruning. If it is, the expert will help you with the pruning thus aiding in the improvement of the tree.

Tree removal: If the tree is posing danger to you and your loved ones, the tree professional will help you in getting rid of it.

Planting: Did you know that you can hire a tree professional when you are planting trees? The arborist will help you in choosing the species that do well in a given area.

If this is the first time you are planting trees, the professional will guide you on the right size of hole you should dig, the amount of fertilizer to apply, among many other things.

Emergency tree care: If your tree is on the brink of falling on your property, the arborist contractor will help you in getting rid of the tree in a safe manner.

Why should you hire an arborist instead of doing the work by yourself?

Some people might have the impression that they can maintain the trees by themselves. While it’s true, if you have the right skills, it’s always wise to hire an arborist. Reasons, why you should hire an arborist, include:

They are trained: For the arborists to be allowed to operate in your area, they have to be trained on proper tree care, tree maintenance, and tree planting.

When you hire the professional, he/she will provide you with all the necessary services including: tree removal, tree pruning, insect treatments, ailment diagnosing, and many others.

Arborists have the right tools: Proper tree removal, maintenance, pruning, and other services require you to have the necessary tools. As a homeowner, you might not have access to the tools thus you might not maintain the trees as well as they are supposed to.

The arborist will have all the right tools in place which will enable him/her to not only provide you with the best service, but also be safe thus reducing the risk of accidents happening.

Things you should ask an arborist when hiring

For you to get the most from the arborist, you shouldn’t hire just anyone. You need to take your time to take your time and find the right one. Some of the things you should know from the professional when hiring include:

Are they fully insured and certified?: Tree care can get dangerous. For example, the tree branches can fall on the people working on the site. For you to avoid carrying the cost of the accident, ensure that the company you are hiring carries the liability insurance.

This way you will be safe when there is damage on your property, or when someone gets hurt on your property.

Experience: How long has the contractor being in operation? You need to know as the more experienced the contractor is, the better the service he/she is going to provide. An experienced contractor will safely undertake the tree removal without putting you and your property in danger.

Equipment to use: The equipment that the contractor uses are as good as the contractor. You need to work with a contractor with the right equipment. Some of the must-have tools include: power saws, lifts, ladders, and many other things.

Pricing: How much are the contractors charging for their services? While you should avoid hiring an extremely cheap contractor, you also should avoid hiring an exorbitantly expensive one as you will end up wasting a lot of money.

Mistakes to avoid when working with an arborist

You can make plenty of mistakes when working with an arborist; therefore, you should be ultra-cautious. As rule of thumb, avoid working with the first contractor you come across. You should note that no two contractors are the same; therefore, you should take your time to hire the right one.

For you to make a decision on the right contractor you should go with, you should compare a number of tree services MD providers and settle on the one providing high-quality services at least cost.

Tree Services: Understanding Tree Trimming

Tree trimming is an important part of regular tree care. Some people have the notion that tree trimming is all about taking a pair of shears and giving the tree your desired look. You should know that it’s more than this. You can do the work by yourself or hire tree services providers to help you out.

Ways of trimming trees

When you are trimming the trees you should know that there are many ways in which you can trim the trees. The most common ones being:

Fine trimming: This is where you remove the small limbs to improve the appearance of the tree

Standard trimming: Here you undertake more heavy cutting to enhance the branch structure of the tree

Hazard trimming: Hazard trimming is recommended for trees that pose danger to your property and family. The process involves the removal of branches that are two inches or more in diameter.

Crown reduction trimming: This involves the removal of major tree branches. You should undertake it when the tree is damaged by a storm, the bark has died substantially, or the branches have interfered with the power lines.

When undertaking this type of trimming, you should remove more than third of the tree’s crown.

Are there benefits of trimming the tree?

You bet there are benefits of doing it, otherwise, people would not be doing it, would they? The benefits include:

Health improvement: Proper trimming improves the health of the trees by eliminating branches that are dead or dying. The branches are usually dangerous; therefore, when you remove them, you reduce the risk of harming your family or damaging your property. Removing the branches will also prevent further decay of the tree.

Improve in overall structure and appearance of the tree: When you trim the tree you prevent limbs from growing with weak crotches or crossing each other and competing for space in the crown.

Improves sun exposure and air circulation: When you get rid of extra branches, you increase sun exposure and air circulation throughout the tree and underlying landscape. As a result, you improve the tree’s health.

Improve the size and quantity of fruits: Do you have fruit trees in your property? When you trim them, you improve the size and quantity of the fruits. For ideal results, you should trim the trees in late winter.

Are there dangers that come with improper tree trimming?

While tree trimming comes with plenty of benefits, it can have counterproductive effects when you do it improperly. Some of the dangers that might come with improper trimming include:

Marred beauty: When you don’t make the right cuts you are bound to interfere with the look of the tree. Some of the mistakes you can make include: topping, tipping, and cutting a disproportionate number of branches from one area of the tree.

When you do any of this, you make the tree look awkward. The situation is worse when the tree takes a long time to outgrow the effects of a bad trim.

Diseased branches: When you are trimming the tree, you are essentially making a cut into the wood. This means you are injuring the tree. Open wounds allow pests and organisms inside the tree causing infections.

In some cases, infections or infestations can cause adverse effects on tree leading to the eventual death of the affected tree.

Property damage: When you are cutting large branches, the branches can easily drop on your property causing significant damage.

Personal damage: You are not only at the risk of damaging your property when you trim your trees improperly, you are also in great danger of hurting yourself when doing it. The falling branches can easily fall on you causing injury. You can also hurt yourself when using the trimming tools.

What is the difference between tree trimming and pruning?

While the two terms are often used interchangeably, they have distinct applications and functions. According to tree removal services MD providers, tree pruning is associated with trees and shrubs. When you undertake to prune these trees and shrubs, you are bound to improve the life of the dead, infected, and broken branches.

You undertake tree trimming on shrubs and hedges. Usually mainly for design purposes. Tree trimming has also been shown to alleviate excessively dense bushes which block essential sunlight and moisture from reaching the landscape.

Air Conditioning Service Repair: Common Air Conditioner Problems And How To Fix Them

Just like any other home appliance, the air conditioner develops a wide range of problems. Here are some of the most common problems as given by air conditioning service repair professionals:

Refrigerant Leaks

The refrigerant will leak if it’s having holes. Most homeowners simply add more refrigerant to their units when they notice the refrigerant levels dropping, but this isn’t the solution. The best way out is to hire an HVAC technician to identify the source of the leak and fix it.

The professional should then add the correct amount of refrigerant for your unit to continue functioning optimally.

There are a number of issues that come with having a leaking air conditioner. The obvious one is that the unit doesn’t function as optimally as it’s supposed to. As a result, you end up spending a lot of money keeping your house cool.

The air conditioner also tends to overwork. As you might have guessed, this results in it coming apart after just a short while. When you notice low refrigerant levels, don’t simply add more. The best way is to hire a contractor who will inspect the unit and if the low levels is due to a leak, fix it.

Clogged air filters

This might sound absurd that people might be having AC problems due to clogged filters, but you will be shocked to realize that it happens more often than you can think about. The air filter determines the air that gets into the unit and also in the house.

Due to its location, it’s common for dirt and other debris to accumulate on it. When you go for a long time without cleaning the unit, it’s bound to clog up. Clogged air filters result in an overworking air conditioner, which further translates to high energy bill at the end of the month.

How can you prevent this problem from coming about? Simple. All you need to do is to make a habit of cleaning your air filters at least once a month. Sometimes the filters are damaged or too dirty for cleaning. In such a case, you have no way out other than to replace them. When buying new units, invest in high-quality pieces with a high-efficiency rating.

Sensor problems

Room air conditioners have a thermostat sensor that is usually located behind the control panel. The sensor measures the temperature of the air getting into the evaporative coil. Sometimes the sensor is knocked out of its position causing the air conditioner to cycle constantly. The unit also tends to behave erratically.

When you notice the air conditioner functioning the way it wasn’t meant to, you should check the location of the sensor. Is it touching the coil? If it is, you should adjust its position. The cool thing is that it’s easy to do it. All you need to do is to bend the wire holding it in place.

You should be keen doing it as you can easily break the wire causing more problems on your side. If you aren’t confident in your skills, you should consider hiring a technician to help you out.

Drainage problems

During winter or when there is humidity outside, the water is supposed to leave via the condensate drain. When you go for a long time without cleaning the drain, it’s bound to clog up thus the air conditioner doesn’t drain water as well as its supposed to.

Just when you are having other air conditioner problems, drain problems mean that the air conditioner works harder than it should. You also tend to spend a lot of money keeping your house cool.

When you notice the condensate drain not draining as effectively as it should, contact air conditioning companies MC Lean to help you with the inspection and fixing of the drains.

Electric problems

The air conditioner might develop a wide range of electric problems. When the problems come about, the unit doesn’t even start. In some cases, the fans and compressors don’t work. Electrical problems are often due to corrosion of wires and terminals.

When you are having any form of electrical problems with your unit, you should hire an experienced technician to help you with the repair. Don’t try to fix them by yourself as you can easily cause fire.

Create An Expensive-Looking Home Office While On A Budget

Let’s face it planning for a room renovation is great, especially if it’s going to be an office space. Of course, work is what balances your lifestyle and your productivity depends on how conducive your office area is. Well, home remodeling can be really tough on the budget, but there are affordable home additions ways to still get your project going while obtaining that stylish office you’ve always dreamed of.

Spend Less For Your Office Spot

Working from home is a growing trend nowadays because of the tons of benefits it offers. Like you don’t need to wake up and prep early for work, you get to avoid the morning rush and traffic, you can just be in your PJs for the whole day eating your favorite pizza and watching Netflix when you’re on break. Seriously? You can now enjoy your morning coffee without chugging it because you no longer have to catch up with that 7:30 am ride to work. There are more reasons than just these, but the important one is that you get to spend more time with your family. Guess, that one is definitely priceless.

Now get down to business and start creating that office space of yours without spending too much.

  • Be Creative.

    • The renovation thought alone is enough to explain that it can be really pricey. Considering that a “major change” had to happen. But if you are financially not ready for a wall-up-wall-down scenario in your house, then you can just make use of the least room or space in your home which you find “useful”. Aside from the laundry room, the basement or the attic are your best options.
  • Go For The Least Expensive One.

    • Shopping for your very own home office haven is really exciting and can be really tempting. But always go with the more affordable items and furniture. You can always scout at Walmart or The Dollar Store for some of the basic things that you might need like storage cabinets, pens, papers or stock boxes. You can also scout online for second-hand furniture or brand new ones that are much cheaper than those from the big furniture shops.
  • Make Use Of What You Already Have.

    • See, you are just transforming an existing space in your house to be your home office sanctuary, therefore, you basically got everything that you need for work. Buying new ones should be your last options. But when it comes to the basic stuff, you already got them. Like lamps, personal computer or laptop, spare lounge chairs, tables and old storage cabinets. You just have to be resourceful enough for you not to spend on something that you already have in the first place.
  • Visit Thrift Stores and Flea Markets For Items.

    • If you happen to need a new table and chair as your working desk, you’ll be able to find cheap and affordable furniture and small items at flea markets and thrift shops. You can usually find antique pieces that still look great, but won’t empty your pocket. Use your imagination to turn your home office zone into something classy.
  • DIY In Office Decors

    • One more leverage of working at home is that you get to have all the time in the world to make a “non-existing” space your own. Do the décor yourself. There’s a lot of DIY tutorials on the Internet for which you can try to construct your own table storage perhaps, or picture frames or revamp your old curtains into something trendy. It’s fun doing things on your own, it makes you feel more productive and accomplished in some sense.
  • Wait For Sale.

    • Fixing your own office space is like baby steps, you have to take one step at a time. You do not need to rush. So when it comes to items that you really wanted for your “creativity” area, make a list of those things and buy them when they’re already on sale. Prioritize what’s most important.

Additional Tip:

The color of your home office should also be considered and here are some of the colors that you might want to have in your zone because they can contribute on the way you think, feel, and act.

  • Green – for balance and helps to reduce eye strain.
  • Red – for energy and warmth.
  • Yellow – to uplift your spirits.
  • Blue – for concentration, focus, and communication.
  • Orange – for fun.

Watching your budget is a good training for yourself and practicing a frugal lifestyle is not so bad at all. At least, you are learning to control and choose wisely rather than being an impulsive and unreasonable shopper. But in any case, you can always go for the home remodeling architects  DC if you totally need an expert to advise you about turning a space in your house or adding an additional room to be your personal office turf.

Tips On How To Prevent Frequent Commercial Refrigerators Repairs

Commercial refrigerators repairs professionals report that most of the refrigerator problems can be prevented thus avoiding having to undertake frequent refrigerator repairs. To help you out, here are some of the ways in which you can avoid having to repair your fridge:

Clean the condenser coils

Refrigerator coils, usually located under the fridge collect dust, pet hair, and debris. The coils are critical to the refrigeration process. When they are dirty, the refrigerator works too hard than it should thus it ends up consuming a lot of power.

Refrigerator experts also report that the dirty condenser coils make it extremely difficult for the refrigerator to transfer heat from the inside to the outside environment thus the unit runs longer than usual. The compressor also tends to run hotter than normal.

This not only results to the fridge consuming a lot of power, it can also lead to the damage of the compressor and associated parts.

For you to ensure that your refrigerator is in top working condition and you don’t spend a lot of energy cooling your food, you should keep the condenser coils clean all the time.

All you need to do is to access the coils by removing the grill or kick plate located at the bottom of the fridge. Depending on the model of your fridge, you will find the plate at the back or front of the unit.

Carefully clean the coils taking care that you don’t bend or cut them. In some cases, you may find that the coils are damaged or worn out. In such a case, you have to way out other than to replace them. The cool thing is that there are plenty of replacement coils in your local hardware stores. You can also purchase them online.

When making the purchase, ensure that you buy pieces that are of the right model of your fridge.

Keep refrigerator doors closed

Did you know that leaving the refrigerator door open makes the refrigerator compressor run hotter and takes longer to cool the food? The refrigerator has also been shown to consume more electricity when you leave the door open.

Refrigerator repair experts observe that when you leave the door open for a long time, you lead to the overheating of the compressor. Due to overheating, the compressor shuts off until it cools off. In some cases, if the heat is excessive, it results to complete damage of the compressor.

For you to prevent cold air from escaping the fridge, you should keep the refrigerator door closed all the time—of course, unless you are getting something out of the fridge. While you are at it, keep the door seals or gaskets clean. This is to ensure that they are making full contact with the fridge when you close the door.

Allow adequate air flow around the fridge

Another thing you should do to prevent having to repair the unit regularly is to ensure that there is adequate air flow around the fridge. If you visit most places of work, you will find the refrigerators constructed into tight-fitting cabinets without ventilation. This is wrong.

Remember, when you do this you leave little ventilation which reduces the lifespan of the refrigerator. The unventilated unit also tends to develop problems every now and then. The main issue being a constant failure of the compressor.

The fridge also doesn’t cool the food as well as its supposed to. You should note that poor airflow means that the fridge can’t remove heat thus it doesn’t cool food.

Do you want your unit to function optimally? Ensure that there is adequate air flow around it. The best way of going about it is allowing a few inches of space on top and sides of the fridge.

Don’t overload the fridge

Although, refrigerators are sturdy and can take a lot of food, you shouldn’t overload them. This calls for you to avoid putting in more food than the unit can handle. In addition to doing so weakening the doors, shelves, and bins, it also tends to speed up the wearing out of the unit thus you have to buy a new one after just a short while.

Do you want to keep the food cool and ensure that the fridge lasts for a long time? Commercial appliances repair Fairfax professionals recommend that you never put more food in the fridge that the unit can handle.

5 Signs It’s Time To Undertake Roof Repair

When is the last time you went up your roof? I guess it has been long, right? Just like any other part of the house, the roof is an important part of the house and you should give it the necessary attention.

This calls for you to get up on the root at least once or twice a year and inspect it for any defects it might be having.

Before you start looking for defects, you need to ask yourself one important question: how old is the roof? Most asphalt shingle roofs can last between 20-25 years; therefore, if your roof is older than this you might not get away with simply making a roof repair.

You may have to replace the roof. If your roof is older than this, you should go ahead and look out for any warning signs and hire a roofing expert to fix it. Some of the warning signs you should look out for are:

Curled or cracked shingles

You should note that curled or cracked roof shingles mean that your roof is at the end of its lifespan. If most of the shingles are cracked or curled, you are better off replacing the roof instead of trying to repair them.

The shingles tend to curl up when they are exposed to harsh weather over a long time. The harsh weather elements become rigid and can snap off and fly away leaving the roof looking ugly.

If only a few of the shingles have curled up, you should remove them and replace them, but if most of them have, you are better off replacing the entire roof.

Dark and damp roof

The roof is designed to keep water flowing down and away from your home. If the roof is doing its work properly, it should maintain its original color. If you notice the shingles looking dark and discolored, it means that water is getting trapped under or around them.

You don’t need to replace the roof when you are having this problem. All you need to do is ask the roof professional to get on the roof and find the source of the problem.

In most cases, the problem is higher up the roof causing the water to run down and pool at a given area. After finding the problematic place, fix the issue.

Leaky roof

We should have started with this as it’s the most obvious sign that you are having a problem. If you notice water dripping from the roof, a wet spot on the ceiling, or puddle forming on the floor, you have a problem that you should fix.

A leak on the roof can come about due to many reasons such as rain damage, old age, and ice buildup. Extreme weather conditions also tend to move the shingles from their original position thus making your roof leak.

Sandy gutters

It’s common for the gutters to have some leaves from the nearby trees, but it’s odd for them to have coarse black sand. The sand is usually granules from worn out shingles. The granules result when the composite and asphalt shingles start aging.

An older roof will shed the granules but if a newer roof is doing it, it’s usually due to physical damage on the roof. The granules are meant to protect the shingles. When the granules are lost, the shingles begin hardening from the effects of the weather elements.

The loss not only give the shingles an ugly look, it also speeds up the aging process and can create entry points for water.

Water and light in the attic

The attic should be dry all the time; therefore, when you notice any water, you have a roof problem. In most cases, all you need to do is to replace the flashing. If the leak goes on, the issue could be bigger than that.

The attic should also be dark. If you notice beams of light that weren’t there before, check the shingles as they might have been lost or damaged.

While in the attic, roofing companies Cos Cob CT also recommend that you pay attention to the decking or rafter. If they are sagging downward instead of remaining straight, they could be the reason for the leak.

Pool Contractors: Ways Of Saving Money When Constructing A Swimming Pool

When homeowners think about constructing a swimming pool, they think about the high costs of doing it. While constructing the pool can be expensive, it doesn’t have to be all the time. This is because there are a number of things you can do to lower the costs. Here are some of these things as given by pool contractors:

Get multiple bids

Instead of talking to only one contractor and hiring him/her, you should speak to a number of them. The best way of going about it is to get bids from at least three companies and comparing them. As rule of thumb, you should work with a company that is ready to give you the best service at least price.

Know what you want from the very beginning

The main reason why the cost of the swimming pool escalates is that the homeowners start making additions in the middle of the construction. This is wrong. When you are operating on a budget, you should know what you want beforehand. This will not only help you explain it better to the swimming pool expert, it also will help you in making the right budget.

When you know the right size, design, and type of pool that you want, you buy all the materials and agree with the contractor beforehand. This has been shown to not only put the cost of construction low, it also makes the construction process fast and easy.

Choose a simple design

If you have constructed a swimming pool before, you will agree with me that the design of the unit greatly affects its cost. This means that when you are operating on a budget, you should go with a simple design.

When you choose a simple design, you require just a few materials. The pool professional also puts the pool together easily which means that he/she spends just a little time in your home thus you pay less for it.

While you should choose a simple design, it doesn’t mean that it should be mediocre. You should ensure that the design is beautiful to look at and matches the theme of your home.

Conclusion

These are some of the tips that you can use to save money when constructing a swimming pool. Even when you are operating on a tight budget, ensure that the unit is installed by a reputable pool masonry contractor. If you have a pool, you know that the maintenance costs can shoot off the roof. For you to save some money, you should maintain the swimming pool by yourself.